Body-Solid CAM Leg Extension Leg Curl Machine GCEC340- Leg Extension Curl Machines

Posted by Junius Maltby

Body Solid GCEC340 Cam Series Leg Ext Curl Machine

The Body Solid GCEC340 machine is sturdy, and it feels sturdy when using it. I had to phone a Body-Solid sales representative in order to find out what the weight capacity is for it. He told me that it can hold 400 lb of weight plates plus 200 lb of the user's body weight, for a total of 600 lb. Why in the world is this information not included with the machine? Some of the assembly was difficult. Before explaining, I should note that the Body-Solid web site contains a PDF file of the owner's manual, although it is missing the assembly diagram. But it does show the hardware and parts illustration sheets, which you might find helpful in understanding my explanation of the difficulty. Part G contains a piece of metal (let's call it a dowel, for lack of a better word). The dimensions of the dowel are 3/16" x 1/4" x 2". I had to pry the dowel out of part G in order to be able to insert part G into parts D9, D, B, and F. Prying it out was difficult, and it took me some time to figure out how to do it. It also took time to figure out that prying it out was necessary or even possible. Here's what contributed to the difficulty: The assembly diagram shows the dowel already separated from G, and the dowel is represented by a line only 3/16" long by 1/16" wide, barely larger than the dashes that link each part in the diagram. And the dowel is not labeled in the diagram, nor is it shown in the hardware and parts illustration sheets. It should have been labeled as a separate part or piece of hardware, and it should not have been inserted into G at the factory, in my opinion! After inserting part G into parts D9, D, B, and F, I had to hammer the dowel back into part G, with the assistance of a nail set, in order to get the dowel all the way into the slot. Nowhere in the instructions was this procedure explained. Regarding usage: In order to get one's left leg under the corresponding upper leg pad, the upper leg pads (as a single unit) need to be removed. After sitting down, then the upper leg pads can be inserted back into the machine. This is an inconvenience because it slows down a workout when doing leg curls, assuming you wish to stand up between sets to stretch and/or to alter the number of weight plates on the machine. (The upper leg pads are not needed for leg extensions and can be removed for this exercise.) The "pop pin plunger" for the upper leg pads needs to be unscrewed by about one and one-half turns in order to raise, lower, or remove the upper leg pads. I'd much prefer it if the pin could be fully pulled out and reinserted while the pop pin plunger is fully screwed in. For leg curls, it is necessary for me to remove (or nearly remove) the upper leg pads so that I can get my legs onto and off of the lower leg pad. I like the thickness and firmness of the lower leg pad; most likely it won't ever hurt my shins when doing leg extensions. Also, the handle bars are well positioned for me. (I am 5' 10" tall.)

4 Reviews

View All

Aaron - Jan 24th 2025
5

Great machine at a great value

Quality materials and build. Enough adjustability to be as useful as expensive commercial gym equipment. Very happy!
Glen Castleberry - Oct 20th 2021
5

Great machine

Like most everything else from bodysolid this is a good solid piece of equipment ! ive had mine about six mo's love it use it every wk! its smooth and very stable ! i like the seated leg curl better than lieing down too ! nearly as good as the 1500 commercial one at the gym . highly recommend .

Posted by Aaron
5

Great machine at a great value

Quality materials and build. Enough adjustability to be as useful as expensive commercial gym equipment. Very happy!
Posted by Glen Castleberry
5

Great machine

Like most everything else from bodysolid this is a good solid piece of equipment ! ive had mine about six mo's love it use it every wk! its smooth and very stable ! i like the seated leg curl better than lieing down too ! nearly as good as the 1500 commercial one at the gym . highly recommend .
Posted by Junius Maltby
4

Body Solid GCEC340 Cam Series Leg Ext Curl Machine

The Body Solid GCEC340 machine is sturdy, and it feels sturdy when using it. I had to phone a Body-Solid sales representative in order to find out what the weight capacity is for it. He told me that it can hold 400 lb of weight plates plus 200 lb of the user's body weight, for a total of 600 lb. Why in the world is this information not included with the machine? Some of the assembly was difficult. Before explaining, I should note that the Body-Solid web site contains a PDF file of the owner's manual, although it is missing the assembly diagram. But it does show the hardware and parts illustration sheets, which you might find helpful in understanding my explanation of the difficulty. Part G contains a piece of metal (let's call it a dowel, for lack of a better word). The dimensions of the dowel are 3/16" x 1/4" x 2". I had to pry the dowel out of part G in order to be able to insert part G into parts D9, D, B, and F. Prying it out was difficult, and it took me some time to figure out how to do it. It also took time to figure out that prying it out was necessary or even possible. Here's what contributed to the difficulty: The assembly diagram shows the dowel already separated from G, and the dowel is represented by a line only 3/16" long by 1/16" wide, barely larger than the dashes that link each part in the diagram. And the dowel is not labeled in the diagram, nor is it shown in the hardware and parts illustration sheets. It should have been labeled as a separate part or piece of hardware, and it should not have been inserted into G at the factory, in my opinion! After inserting part G into parts D9, D, B, and F, I had to hammer the dowel back into part G, with the assistance of a nail set, in order to get the dowel all the way into the slot. Nowhere in the instructions was this procedure explained. Regarding usage: In order to get one's left leg under the corresponding upper leg pad, the upper leg pads (as a single unit) need to be removed. After sitting down, then the upper leg pads can be inserted back into the machine. This is an inconvenience because it slows down a workout when doing leg curls, assuming you wish to stand up between sets to stretch and/or to alter the number of weight plates on the machine. (The upper leg pads are not needed for leg extensions and can be removed for this exercise.) The "pop pin plunger" for the upper leg pads needs to be unscrewed by about one and one-half turns in order to raise, lower, or remove the upper leg pads. I'd much prefer it if the pin could be fully pulled out and reinserted while the pop pin plunger is fully screwed in. For leg curls, it is necessary for me to remove (or nearly remove) the upper leg pads so that I can get my legs onto and off of the lower leg pad. I like the thickness and firmness of the lower leg pad; most likely it won't ever hurt my shins when doing leg extensions. Also, the handle bars are well positioned for me. (I am 5' 10" tall.)
Posted by Scott Schumacher
5

Seated leg curl/leg extension

2years of heavy use and still just as solid and smooth as the first day of use.If you are thinking of adding this piece of equipment to your home gym I would highly recommend it.

Body-Solid CAM Leg Extension Leg Curl Machine

Body-Solid

Options

Warranty

Warranty

Full Product Description

Conquer Leg Day with Effective Leg Extensions & Leg Curls at Home!

FULL PRODUCT DESCRIPTION

Conquer Leg Day with Effective Leg Extensions & Leg Curls at Home!

REVIEWS

4 Reviews

Great machine at a great value

Great machine

4 Reviews

Great machine at a great value

Great machine

Body Solid GCEC340 Cam Series Leg Ext Curl Machine

Seated leg curl/leg extension

WHY BUY FROM FITNESSFACTORY.COM?

Body-Solid Pro Select CAM Leg Extension Leg Curl Machine

Body-Solid Leg Extension and Curl Machine

Body-Solid ProDual Leg Extension Curl Machine with Weight Stack

Powerline Leg Curl and Leg Extension Machine for Quad and Hamstring Workouts

Pro ClubLine Leg Curl by Body-Solid

Spirit Commercial Strength Leg Extension and Curl Machine

Body-Solid Leg Ext and Curl Bench Attachment

Pro ClubLine Leverage Leg Curl by Body-Solid

Pro ClubLine Leg Extension by Body-Solid

Body-Solid CAM Leg Extension Leg Curl Machine

Write a Review

Body-Solid

Body-Solid CAM Leg Extension Leg Curl Machine

Warranty

Full Product Description

Conquer Leg Day with Effective Leg Extensions & Leg Curls at Home!

FULL PRODUCT DESCRIPTION

Conquer Leg Day with Effective Leg Extensions & Leg Curls at Home!

REVIEWS

WHY BUY FROM FITNESSFACTORY.COM?

Customers Also Bought